Microcement / Finish material
Microcement – Nikkolor MicroCem-FB Fibre-Reinforced – 20 kg
Fibre-reinforced microcement with larger aggregate and a more textured, naturally pitted, organic surface. Material only, about 16 m2 per pack.
- Pack
- 20 kg
- Indicative
- $350.90
- Freight
- Confirmed at checkout or by quote
Colour and texture vary with lighting and application. Confirm your finish with a physical sample before specifying.
The decorative layer for a MicroCem-FB system: a reduced-thickness, fibre-reinforced finish for continuous mineral surfaces, hand-applied, with the more pitted and organic character that larger aggregate gives.
Nominal coverage and cost basis
- Pack
- 20 kg powder
- Nominal coverage
- About 16 m2 for the full two-coat cycle
- Consumption
- 1.25 kg/m2 total for both coats combined (do not double it)
- Material cost basis
- About $21.93 per m2 ($350.90 / 16 m2)
- Mixing water
- About 6 L per 20 kg pack (300 mL per kg), toner not subtracted
- Pot life
- About 4 hours at +20 C
Not included
- Primer or receiving layer
- Toner (required for colour)
- Fibreglass mesh
- Protective finish
- Tools
Where it is used
- Correctly prepared floors and walls
- Benchtops, joinery and pools within a specified system
- Residential, commercial and hospitality work
Read before specifying
Limits and conditions
- Substrate condition, exposure, waterproofing, movement joints and drainage must be assessed for the project. Performance and approvals are not transferable from one build to another.
- Primer, toner and protective finish are selected separately from the substrate and intended use.
- Compare with Cemento 3D if you want a smoother, marble-like surface.
Shipping notes
- Freight is quoted for your delivery address and confirmed in our response. Material supply is Australia-wide.
- Pack weights make parcel freight a real cost on larger orders, so confirm the quote before you commit.
Delivery and ordering guidance
Questions
Is toner included in the pack price?
No. MicroCem-FB is the powder only. Per 20 kg pack, TA Light uses 2 toner bottles, TB Medium 3 and TC Dark 4. Toner is added as a matching line.
Does this pack come in Matt or Satin?
No. The decorative material is one product. Matt, Satin, Semi-Gloss and other sheens belong to the protective finish applied on top.
How far does one 20 kg pack go?
About 16 m2 for the full two-coat decorative cycle. The 1.25 kg/m2 figure is the total for both coats, not per coat.
Components and kit alternatives
Complete kits
Microcement Wall & Ceiling Kit – MicroCem-FB – 15 m²
15 m2 nominal · Complete TA system $852.50
MicroCem additives
Etna — MicroCem additive
Additive; pack confirmed on request · On request
MicroCem additives
Terra Veneziana — MicroCem additive
Additive; pack confirmed on request · On request
Primers
Nikkolor Primer NK — 2.5 L
2.5 L · $174.90
Primers
Nikkolor Primer Beton — 20 kg
20 kg · $280.50
Toners
Nikkolor Toner — 250 ml
250 ml · $31.90
Protective finishes
Nikkolor VetroLiquido PRP
2.5 L · $295.90