MicroCem-FB sample

Floor guide

Microcement floors: what to know before you start

Compare Nikkolor microcement floor options, substrate checks, preparation, protection and care. Plan quantities and approve samples before ordering kits.

Buyer guide

The starting point for a microcement floor is the floor underneath it. Before comparing colours or ordering a kit, establish the substrate, its condition and how the space will be used. Nikkolor’s system guides separate release checks, preparation, decorative coats and protection. This planning guide explains how those published steps fit together without promising the same system for every floor.

Smooth MicroCem-FB surfaces in a warm living room with low sofas and timber detailing.

Which floor substrate am I working with?

Identify whether the receiving surface is existing tile, a cement screed, concrete or another listed substrate. The guides cover multiple substrates because their preparation is not interchangeable. They require a stable, sound, clean and suitably dry surface, with moisture, movement and flatness defects resolved before decorative work starts.

Use the section that matches the real project and record the agreed build-up. Existing tiles need adhesion, joint and deflection checks; screeds and other receiving surfaces have their own release requirements. If the floor cannot pass them, stop and correct it. Extra decorative coats are not a substitute for repairing an unsuitable base.

How do Cemento 3D and MicroCem-FB differ?

The published buyer’s guide describes Cemento 3D as fine mineral, smooth and marble-like with subtle movement. MicroCem-FB is fibre reinforced, with larger aggregate and a pitted, organic character. Both are hand-applied finishes whose appearance depends on the work. Use material-specific physical samples rather than expecting two installations to reproduce a screen image exactly.

The choice of decorative material does not remove the need for compatible preparation and protection. The system builder and the corresponding system guide help organise those decisions. Do not borrow a build-up from another substrate simply because it uses the material you prefer. Rock-textured effects belong to the separate Cemento Roccia range, not the smooth floor appearance described here.

What do the smoothing and mesh boxes mean?

Smoothing replaces Primer NK with Primer Beton. On Cemento 3D kits, selecting mesh also brings Primer Beton in place of Primer NK, even if smoothing is not ticked. Selecting both includes Primer Beton only once. On MicroCem-FB kits, selecting mesh adds mesh without changing the primer unless smoothing is also selected.

The purchase panel’s contents list shows the chosen combination. Use the technical guidance to decide whether reinforcement is needed; it is not a general cure for every movement problem. Mesh does not replace movement joints. Joints, repairs and the substrate condition must be assessed separately, and the kit options must follow that assessment.

Which protection and slip information should I check?

Standard kits are sealed with Decor Finish; Pro kits use VetroLiquido PRP. The published Decor Finish limitations distinguish walls and dry interior floors from other exposures. A sealer selected for one use must not be assumed appropriate for another. Check the current product data and the complete project specification.

The floor slip add-on is optional and separately priced. It does not confer an Australian slip classification or approval for wet floors, showers or exterior use. Where a project needs a particular slip performance, the information on this site does not establish that result for you. Ask for the appropriate technical guidance before proceeding.

How much material and colour should I order?

The four kits come in nominal 15 m² and 30 m² sizes, and the system builder can suggest a mix for larger areas. Account for edges, details, substrate and wastage rather than treating nominal coverage as a guarantee. Review the current price for the exact kit, size, finish and preparation options you have selected.

Kits ship in natural base. Colour toner is optional and appears as a separate line, as does the paid floor add-on when selected. Tools, labour, waterproofing and repair work are not included automatically. Freight is calculated at checkout. Keep the quoted scope clear if comparing material supply with an installed project from Lux Cement.

The Colour Room lets you compare colour families and tones in a floor illustration; the AI Visualiser can show a colour idea in your own room. Neither replaces a physical sample. View the intended material, colour and protection in the project’s light, beside the finishes that remain, and keep the approved board for reference.

How will I look after the finished floor?

Follow the care page and the data sheet for the protection used. The published guidance separates drying from curing, warns against cleaning during the first week and says never to drag furniture. Lift furniture and use felt or soft protectors. Ask about cleaning products before using them, and avoid abrasive cleaning.

Record the protection, cure dates and handover restrictions so the owner knows when and how the floor may be used. If the technical information does not settle a condition on your project, ask before applying the finish. Keep the five-year product warranty separate from any workmanship promise made by the installer.

Common questions

Can a decorative layer fix a moving floor?

No. Instability and movement must be resolved before the decorative work; mesh does not replace movement joints.

Does the kit price include tint?

Kits ship in natural base. Optional toner is selected and priced separately on the kit page.

Can I clean as soon as it looks dry?

No. Follow the care and protection instructions; dry is not the same as cured, and the care page says not to clean during the first week.

Before you buy

  • Prices are AUD catalogue estimates, not quotations. Freight, tools, labour and substrate work are extra.
  • Confirm the current technical data sheets and a physical sample before specifying.