Microcement / Finish material
Microcement – Nikkolor Cemento 3D Structured Finish – 20 kg
Smooth, marble-like structured microcement with subtle movement. Combines marble powder with mineral ingredients. Material only, about 16 m2 per pack.
- Pack
- 20 kg
- Indicative
- $308.00
- Freight
- Confirmed at checkout or by quote
Colour and texture vary with lighting and application. Confirm your finish with a physical sample before specifying.
The decorative layer for a Cemento 3D system: a hand-trowelled, continuous finish that can read as restrained and soft or as deeper sculpted texture, depending on the applicator. It is used with a compatible primer, colour toner and protection.
Nominal coverage and cost basis
- Pack
- 20 kg powder
- Nominal coverage
- About 16 m2 for the full two-coat cycle
- Consumption
- 1.25 kg/m2 total for both coats combined (do not double it)
- Material cost basis
- About $19.25 per m2 ($308.00 / 16 m2)
- Mixing water
- About 6 L per 20 kg pack (300 mL per kg), toner not subtracted
- Pot life
- About 4 hours at +20 C
Not included
- Primer or receiving layer
- Toner (required for colour)
- Fibreglass mesh
- Protective finish
- Tools
Where it is used
- Correctly prepared floors and walls
- Feature walls, ceilings and joinery faces
- Residential, commercial and hospitality work within a specified system
Read before specifying
Limits and conditions
- Substrate condition, exposure, waterproofing, movement joints and drainage must be assessed for the project. Performance and approvals are not transferable from one build to another.
- A material-only pack is not a complete system. Select primer and any mesh from the real substrate, and protection from the real service condition.
- Compare with MicroCem-FB if you want larger aggregate and a more pitted, organic texture.
Shipping notes
- Freight is quoted for your delivery address and confirmed in our response. Material supply is Australia-wide.
- Pack weights make parcel freight a real cost on larger orders, so confirm the quote before you commit.
Delivery and ordering guidance
Questions
Is toner included in the pack price?
No. Cemento 3D is the powder only. Per 20 kg pack, TA Light uses 2 toner bottles, TB Medium 3 and TC Dark 4. Toner is added as a matching line.
Does this pack come in Matt or Satin?
No. The decorative material is one product. Matt, Satin, Semi-Gloss and other sheens belong to the protective finish applied on top.
How far does one 20 kg pack go?
About 16 m2 for the full two-coat decorative cycle. The 1.25 kg/m2 figure is the total for both coats, not per coat.
Components and kit alternatives
Complete kits
Microcement Wall & Ceiling Kit – Cemento 3D – 15 m²
15 m2 nominal · Complete TA system $809.60
Primers
Nikkolor Primer NK — 2.5 L
2.5 L · $174.90
Primers
Nikkolor Primer Beton — 20 kg
20 kg · $280.50
Toners
Nikkolor Toner — 250 ml
250 ml · $31.90
Protective finishes
Nikkolor Decor Finish — 2.5 L
2.5 L · $262.90