Buyer comparison
Microcement vs tiles vs polished concrete
Compare microcement, tiles and polished concrete by project scope, substrate, finish and care. Use Nikkolor facts and ask other suppliers for project details.
Buyer guide
A useful comparison starts with the same room and the same scope of work. A microcement supply price cannot be compared fairly with another supplier’s complete installed quote. This site publishes Nikkolor system information, not a tile or polished-concrete specification. The comparison below therefore explains what is known here and what to ask the other suppliers, without inventing performance rankings or installation prices.

What exactly am I comparing?
For Nikkolor microcement, compare the selected decorative material, preparation, optional reinforcement, protection and tint. The published system guides describe two decorative coats over a substrate-specific build-up. The finish is decorative, not a waterproofing membrane or a repair for instability. Those limits form part of the comparison, not just the product name.
For tiles or polished concrete, ask the proposed supplier to identify their complete system and the work included in their price. This site does not publish the necessary technical data to rank those alternatives for your project. Do not assume that a quoted appearance, floor name or nominal area means each proposal includes the same preparation, detailing or protection.
What does the existing surface allow?
Nikkolor’s guides cover substrates such as existing tile, screed and concrete, each with release checks. Existing tiles can be considered for an overlay only after adhesion, joints and deflection are checked. A stable, sound, clean and suitably dry receiving surface is required. Movement and moisture issues must be resolved before the decorative work.
Ask each other supplier how their proposed system deals with the substrate you actually have. Request their technical guidance where demolition, repair, finished levels or interfaces are uncertain. The Nikkolor information cannot determine those answers for a different product. Keeping the same substrate description in every enquiry makes the responses easier to compare.
Which appearance am I trying to achieve?
Cemento 3D is described here as smooth and marble-like with subtle movement. MicroCem-FB has larger aggregate and a pitted, organic character. Both are hand-applied, so physical samples are important. These are descriptions of the Nikkolor finishes, not a claim that they reproduce a particular tile, stone or polished-concrete product.
Use the Colour Room to compare Nikkolor colour families and tones, and the AI Visualiser to picture a smooth Cemento 3D colour in your own room. Then approve a physical sample with the intended protection. Ask the alternative suppliers for their own samples and assess all of them in the room’s light rather than comparing unrelated photographs.
How should I compare cost per square metre?
The Nikkolor kit costs guide explains how to divide a selected material price by nominal coverage. The kits come in 15 m² and 30 m² sizes, with prices supplied live for the chosen options. That figure is not an installed rate. Toner, preparation choices, tools, labour, waterproofing and substrate work may sit outside the base selection.
Ask for a scope breakdown from every supplier before comparing totals. Include the actual area and the details that need finishing, not only the room’s floor dimensions. Shipping for online purchases is calculated at checkout. The site does not publish a market-wide price for tile installation or polished concrete, so no cheaper-or-dearer ranking is offered here.
What should I ask about bathrooms and floors?
For microcement, waterproofing, falls, drainage, joints and penetrations are separate requirements. Decor Finish has limits for walls and dry interior floors, and the optional floor slip add-on does not itself establish an Australian slip classification or wet-floor approval. A project specification is needed where the published guidance does not confirm the intended use.
Ask the tile or concrete supplier for the equivalent evidence and requirements for their own system. Do not carry an approval or rating from one material to another. This comparison does not say that any one of the three choices is universally suitable for showers, exterior work or another particular exposure.
How do care and warranty affect the decision?
Nikkolor’s care guidance separates dry from cured and explains precautions around cleaning, furniture, heat and chemicals. The owner needs the instructions for the protection actually used, together with cure dates and handover restrictions. A finished sample does not tell you when a newly applied surface can return to service.
Every genuine Nikkolor product bought from Nikkolor Australia has the five-year product warranty under the published terms. It is a product promise, not an application-work warranty. Ask each alternative supplier and installer for their own written care and warranty terms. Compare what those documents cover rather than assuming the number of years describes the same protection.
If you would prefer an installed microcement project, contact Lux Cement. Ask for the scope to identify supply and application clearly. Where this site is silent about a technical comparison, use the relevant technical documents or contact the supplier rather than treating an unanswered question as a benefit or a drawback.
Common questions
Is the kit price an installed cost?
No. Kits are material supply; labour, tools and other project work are not automatically included.
Does this site rank tiles or polished concrete for durability?
No. It does not publish the comparable technical data needed to make that claim. Ask the relevant suppliers for their product specifications.
Can I compare finishes using screens alone?
Use screens to narrow the choices, then assess physical samples and the intended protection in the project’s own light.
Before you buy
- Prices are AUD catalogue estimates, not quotations. Freight, tools, labour and substrate work are extra.
- Confirm the current technical data sheets and a physical sample before specifying.

