Microcement system builder
Microcement quantities
by area
Two tools. First, a multi-area manufacturer quantity worksheet: pack counts from the manufacturer reference, without Australian prices, stock or basket add. Second, a locally priced estimate for Cemento 3D and MicroCem-FB only. Products without local mapping, such as MarmUra, are not priced or treated as local equivalents. Neither is approval for your substrate or exposure.
For other ranges, ask for product-specific quantity and application advice.
A-02 Quantities
Manufacturer quantity worksheet
Multi-area quantities
Pack counts from the manufacturer reference snapshot, for up to 24 zones. No verified Australian prices or stock, and nothing here is added to the basket. Every zone starts with unknown safety checks and no substrate, so nothing is included until you assess it. Ask for a project specification.
1 of 24 zones, 10 m² entered
Zone 1
Blocked, excludedPreparation: None listed
- Identify an applicable actual substrate.
Eligible with waste
0 m²
Excluded pending review
10 m²
Quantity worksheet only. No prices, stock or basket add.
No zone is eligible yet. Assess the substrate and safety checks for each zone, or request a specification.
VetroLiquido PRP uses the local three-coat basis of 17.5 m² per pack and requires dangerous-goods freight quotation or pickup. Cream Wax and Velatura never substitute for required protection.
Decor totals do not split Matt and Semi-Gloss quantities. Tapioca Matt needs one Semi-Gloss coat plus two Matt coats; confirm supply of both finishes before ordering.
Corner beads, joints, waterproofing, freight and labour are excluded. Contact us for specification.
Locally priced estimate
Single-area priced set
A separate estimate using verified Australian pack prices for Cemento 3D and MicroCem-FB. Worksheet choices above are not copied here. Eligible sets can be added to the basket for enquiry.
Material
Choose a colour
No colour selected
Select a colour swatch below. Approve the selected tone on a physical sample.
Tone
Substrate preparation
Technical preparation schedule required
Choose an assessed substrate. Unsupported preparation schedules cannot be added to the basket.
Protection
Finish
The manufacturer builder uses 16 m² per 2.5 L for either complete cycle, before wastage. Choose the specified cycle, not a lower coat count to save material. Manufacturer system builder.
Fibreglass mesh
Additional reinforcement needs substrate assessment. Mesh does not replace movement-joint treatment.
Stop. Technical review required
- Substrate not chosen or unknown. Identify and assess the actual substrate first.
- Choose the application.
Select a colour to calculate.
50 of 50 product lines available. 0 currently used.
Your choices are kept in this tab while you review the basket. If browser storage is unavailable, use the return link without reloading or closing this tab.
Review existing basket selectionsOnce in the basket, individual lines are locked. Changing one line will warn you that the set no longer matches the calculation.