MicroCem-FB sample

Joinery guide

Microcement benchtops and joinery

Plan Nikkolor microcement benchtops and joinery: check substrate stability, edges, VetroLiquido PRP protection, samples and care before choosing a Pro kit.

Buyer guide

Benchtops and joinery bring the finish close to everyday use, so a photograph is only the starting point. Nikkolor lists these applications with protection and preparation requirements, not as a universal coating instruction. Establish the receiving surface, the exposure and the complete build-up first. Then compare the decorative material and colour with a physical sample of the intended protected finish.

Microcement Pro Kit – MicroCem-FB — catalogue illustration

Can the existing benchtop be coated?

The system guides include worktops among their substrate cases. That is a reason to consult the correct section, not automatic approval for every bench. The buyer’s guide says the receiving surface must be stable, sound, clean and suitably dry. Timber and framed substrates need a stiffness assessment, and movement or moisture must be resolved before decorative work.

Describe the actual substrate and the details around edges, joints and penetrations when requesting guidance. Do not transfer a tile-floor build-up or a wall example to a worktop. The layer illustrations show order only, and their warning against adding wet-layer thicknesses or transferring the sequence to another project applies here too.

Which kit is intended for this type of work?

The Pro kits are for benchtops, heavy traffic, external areas and pools and include VetroLiquido PRP protection. There is a Cemento 3D version and a MicroCem-FB version, each in 15 m² and 30 m² sizes. They offer the same separate smoothing and reinforcement choices described on their product pages. Select those choices from the substrate assessment, not from the kit name alone.

Cemento 3D uses Primer Beton instead of Primer NK when smoothing or mesh is selected. MicroCem-FB swaps the primer for smoothing, while mesh alone leaves the primer choice unchanged. The contents list and current price update for the chosen combination. The ability to buy a kit online does not establish the suitability of an unassessed substrate.

Why does the protective finish matter?

VetroLiquido PRP follows its own current data sheet and the project specification. The care page says to record the protection used, the cure dates and the handover restrictions for the owner. Do not apply a drying, recoating or cleaning instruction from a different protective product simply because both are called sealers.

The site does not provide a universal approval for every benchtop service condition. If the planned exposure, cleaning method or a particular performance requirement is not resolved by the published information, ask Nikkolor before ordering. This guide does not add claims about food contact, resistance or heat beyond the current product and care guidance.

How do I choose a smooth finish and colour?

The published descriptions distinguish smooth, marble-like Cemento 3D from the more pitted, organic character of MicroCem-FB. Those are finish descriptions, not promises that every hand-applied surface will be identical. Approve the intended material, colour and protective finish together, and let the physical sample guide the final decision.

Start with the Colour Room to compare the 16 families and TA, TB and TC tones. The AI Visualiser can help you picture colour in your own photo, but it shows a smooth Cemento 3D interpretation. It cannot establish your actual sheen, detailing or substrate suitability. On-site appearance changes with trowel work, sealer, substrate and light.

View the sample beside the joinery, flooring and fittings that will remain. Keep the agreed board with the project documents so everyone is discussing the same finish. Toner doses for a microcement system must not be transferred to another decorative range without confirmation of the correct formula.

What else belongs in the budget and order?

A kit price is material supply for the selected contents, not a complete installation price. The published exclusions include tools, labour, repair and movement-joint materials, waterproofing and freight. Toner is an optional separate line. Check the current product page for the exact combination and its current price rather than using an old example.

Measure the work and details carefully using the system builder and current coverage guidance. Nominal kit areas are not a promise for every edge or substrate. PRP and Pro kits are purchased online with shipping calculated at checkout. If you want someone to install the finish, ask Lux Cement about the project and keep that installation scope separate from the supply order.

What care instructions should the owner receive?

The care page calls for trivets and mats on benchtops and says heat exposure should be assessed for the project, not tested on the finished surface. It also advises avoiding concentrated chemicals, solvents and strong cleaners. Ask about unusual products before using them and avoid abrasive cleaning.

Record when the surface may be used and how it should be maintained under the applicable protection instructions. Keep the invoice and product details for the five-year product warranty. That warranty concerns manufacturing defects in the supplied products; any separate workmanship warranty comes from the installer, not from choosing a Pro kit.

Common questions

Do Pro kits include VetroLiquido PRP?

Yes. The Pro kit pages list VetroLiquido PRP as their protective finish; follow its current data sheet and the project specification.

Can I put hot items straight on the finish?

The care page says to use trivets and mats and to assess heat exposure for the project rather than testing it on the finished surface.

Does the kit include installation?

No. Labour and tools are excluded. Contact Lux Cement if you want an installed project rather than materials alone.

Before you buy

  • Prices are AUD catalogue estimates, not quotations. Freight, tools, labour and substrate work are extra.
  • Confirm the current technical data sheets and a physical sample before specifying.