MicroCem-FB sample

Colour planning

How to choose a microcement colour

Choose a Nikkolor microcement colour with the Colour Room, 48 colour and tone options, AI room previews and physical sample boards viewed in your own light.

Buyer guide

Start with the room, not a tiny isolated swatch. Nikkolor’s Colour Room brings the colour families, three tones and suggested neighbouring finishes together so you can narrow your choice. The AI Visualiser then lets you consider a colour in your own photograph. Both help with the decision, but a physical sample of the intended finish is still the basis for approval.

Nikkolor Toner — 250 ml — catalogue illustration

How many colours and tones can I compare?

The site offers 16 Nikkolor colour families in three tones: TA Light, TB Medium and TC Dark. Together these make 48 screen choices. The Colour Room arranges them by collection, with each family’s shades beside one another on the rack. Keep both the colour name and the tone in your notes so the choice is not reduced to just “light grey” or “warm white”.

Choose the room illustration that is most helpful: Feature wall, Bathroom or Floors. Turn the rack or use its controls to compare boards, then open a board for a closer look at the selected colour and shade. The rooms are labelled illustrations. They are a way to explore the palette, not photographs proving how that colour will appear on your substrate.

What does the Daylight control tell me?

Midday shows the selected board colour without the warming or cooling shift. Morning gently cools the illustration and Evening warms it a touch; the board remains the screen reference for the true colour. These are visual guides, not a measurement of the light in your home. Use them to notice how your preference changes when the scene changes.

The finished result also depends on substrate, trowel work and sealer. A screen cannot reproduce every aspect of texture or sheen. The site’s advice is to inspect a physical sample in the room’s light, beside the materials that remain. Do that before committing to the final combination rather than assuming a phone display gives an exact finish approval.

How should I use the suggested pairings?

The “Sits well with” swatches are neighbouring finishes rather than more microcement colours. Depending on the room they include paint, timber, tile or stone, tapware, carpet and curtains. Paint suggestions use Dulux screen values, and the source tags identify the published Australian sources used for the suggestions.

The page explains that the match to a Nikkolor colour is the site’s own choice. A researched palette is still a starting point, not a requirement to replace your fittings. Compare the suggested materials with what you already have, and check real paint and material swatches before ordering. Screen values remain guides rather than a substitute for those samples.

What can the AI Visualiser help me decide?

Use your own room photo and tick the surfaces the tool identifies, then choose a colour and tone. A link from the Colour Room can carry the selected shade into the visualiser. The preview shows that colour in a smooth Cemento 3D finish; there is no choice of another material in the tool.

Read the note above and below the result. The preview is a guide, and on-site colour and movement vary with substrate, trowel work, sealer and light. Approve a physical sample board first. The picture does not confirm substrate suitability, coverage, waterproofing or the preparation needed for the room. Those decisions belong to the technical and system guidance.

How do I turn a shortlist into sample boards?

Add up to five chosen boards to the Colour Room tray, then use the sample request hand-off. The sample page lets you review the request rather than treating an illustration as a purchase specification. The published microcement boards are 300 mm by 200 mm; check the current sample page for the selected finish and order details.

Keep the colour, tone, material and protection together when reviewing samples. Compare them beside the timber, paint, tile or fittings that will remain. Save the approved board with the project information so the applicator and owner share the same reference. If the requested combination is unclear, contact Nikkolor before ordering the full material quantity.

Does choosing a colour also choose the kit?

No. A colour choice does not decide the substrate build-up. Standard and Pro kits differ in protection, and smoothing and mesh must follow the substrate assessment. Kits ship in natural base, with optional toner as a separate line. Review the exact contents and current price on the kit page.

The palette is also referenced for LimeWash Paint, Marmorino + Lime and Marblex Mirror, but the microcement toner formula must not be assumed correct for those products. Confirm the formula and dosage for the selected range and pack. If you want an installed finish rather than supplies alone, discuss the project with Lux Cement and keep the approved sample part of that brief.

Common questions

Does the preview replace a physical sample?

No. Approve the material, colour and protection on a physical sample in your own light before making the final choice.

What does TA, TB or TC mean?

TA is Light, TB is Medium and TC is Dark. Record the tone together with the colour name.

Can I use the same toner dose for limewash?

Not automatically. Confirm the formula and dose for the actual decorative range and pack size.

Before you buy

  • Prices are AUD catalogue estimates, not quotations. Freight, tools, labour and substrate work are extra.
  • Confirm the current technical data sheets and a physical sample before specifying.