MicroCem-FB sample

Preparation guide

Microcement over tiles: can you, and what do you need?

Planning microcement over tiles? Check tile adhesion, grout lines, primer, mesh and protection, then compare Nikkolor kits and approve a physical sample.

Buyer guide

You can consider microcement over existing tiles, but the condition of the tiles matters more than the colour you want to put over them. Nikkolor’s system guides include an existing-tile build-up. They also set out checks that must be passed before decorative work starts. This guide explains those decisions without treating a kit purchase as approval of the surface underneath.

Smooth Cemento 3D walls in a grey living room with an arched window and low fireplace.

How do I know whether the tiles can stay?

Start with the existing-tile section of the relevant system guide. The published buyer’s guide calls for tile adhesion, joints and deflection to be checked before an overlay is considered. The receiving surface must be stable, sound, clean and suitably dry. Loose or drummy tiles must be corrected before application. Covering them with another decorative layer is not the repair.

Treat the assessment as a separate step from choosing a finish. If there is movement, unresolved moisture or another failed release check, stop and resolve it first. Where the condition of the substrate is uncertain, send the project details to Nikkolor and ask for guidance. A photograph of a finished tiled room does not establish what is happening beneath it.

What happens to the grout lines and uneven areas?

The kit pages describe smoothing as appropriate where dips, ridges or grout lines would show through beyond what the microcement covers. Smoothing and reinforcement are different choices: one changes the primer preparation, while the other adds mesh. Do not choose them simply because a photograph looks smooth. Check the complete tile build-up for the selected material.

The published layer views show the order of the system rather than a transferable thickness specification. Keep their caution in mind: do not add wet-layer thicknesses together or move a build-up from one project to another. If you need a finished-height allowance around a door, joinery or a threshold, check the technical data and obtain project-specific advice rather than estimating it from an illustration.

Which primer and mesh options does the kit use?

On Cemento 3D kits, a sound flat surface starts with Primer NK. Choosing smoothing replaces Primer NK with Primer Beton. Choosing reinforcement mesh also replaces Primer NK with Primer Beton, whether smoothing is ticked or not. Selecting both gives Primer Beton once, plus the mesh. Read the updated contents list before adding the kit to your basket.

MicroCem-FB has separate smoothing and mesh options too. Smoothing replaces Primer NK with Primer Beton; mesh adds reinforcement without automatically changing the primer. These purchase options describe what you will receive, not which preparation your tiles need. Use the MicroCem-FB system guide and the technical data to choose the appropriate combination. Mesh does not replace movement joints.

Does going over tiles make a wet area waterproof?

No. The site describes microcement as a decorative finish, not a waterproofing membrane. Bathroom work needs compliant waterproofing and a project-specific specification. Falls, drainage, penetrations and movement joints remain separate work. An existing tiled surface is not, by itself, evidence that those requirements have been met.

Protection must match the intended service conditions. Decor Finish has limitations for walls and dry interior floors; a floor slip add-on is not an Australian slip classification or wet-floor approval. Do not take a kit title, a sealer choice or a finished-room picture as approval for a shower floor. Ask for the complete specification where the published documents do not resolve your project.

How should I plan the order and the finished appearance?

Kits are offered in nominal 15 m² and 30 m² sizes. Measure the actual areas and account for edges, details and substrate conditions using the system builder and current technical guidance. The selected kit page supplies its current price and contents. Toner, tools, labour, waterproofing and repairs are not automatically part of that price. Shipping is calculated at checkout.

Use the Colour Room to narrow down colour and tone, then try the AI Visualiser on your own room. Both are screen guides. Approve a physical board of the intended finish in the room’s light before ordering the full project. Keep that board and the agreed preparation and protection information together for the applicator.

If you want installation rather than materials alone, speak with Lux Cement. Keep the installer’s assessment and any workmanship warranty separate from the five-year Nikkolor product warranty. After application, follow the care and handover guidance for the protection actually used; a surface that looks dry is not necessarily ready for normal use.

Common questions

Can loose tiles be covered with a kit?

Loose or drummy tiles must be corrected first. Extra decorative coats are not a substitute for a sound substrate.

Does mesh replace movement joints?

No. Mesh does not replace movement joints; the project’s joints and repairs need their own assessment.

Is a tiled shower automatically suitable?

No. Confirm the waterproofing, substrate, drainage and complete finish specification before applying microcement.

Before you buy

  • Prices are AUD catalogue estimates, not quotations. Freight, tools, labour and substrate work are extra.
  • Confirm the current technical data sheets and a physical sample before specifying.