Complete kits / Full system
Microcement for Tiled Floors & Walls – MicroCem-FB Kit – 15 m²
MicroCem-FB system for existing tiled walls, with Decor Finish. Complete TA price $989.38, about $65.96 per m2.
- Pack
- 15 m2 nominal
- Indicative
- Complete TA system $989.38
- Freight
- Confirmed at checkout or by quote
Colour and texture vary with lighting and application. Confirm your finish with a physical sample before specifying.
A MicroCem-FB build-up for working over existing ceramic or porcelain tile, with Primer Beton as the receiving layer, pre-cut mesh, two decorative coats and Decor Finish.
Nominal coverage and cost basis
- Nominal coverage
- Up to 15 m2 over two decorative coats
- Base kit price (before toner)
- $925.58
- Complete TA Light price
- $989.38 including 2 toner bottles (about $65.96 per m2)
- Complete TB Medium price
- $1,021.28 including 3 toner bottles
- Complete TC Dark price
- $1,053.18 including 4 toner bottles
What the kit includes
- 1 x 20 kg Nikkolor Primer Beton
- 18 m2 pre-cut fibreglass mesh, including overlap and trimming allowance (covers 15 m2)
- 1 x 20 kg Nikkolor MicroCem-FB in your selected colour
- 2, 3 or 4 x 250 ml Nikkolor toner in the selected colour (TA Light = 2, TB Medium = 3, TC Dark = 4 bottles per kit)
- 1 x 2.5 L Nikkolor Decor Finish (Matt or Semi-Gloss)
Not included
- Tools, trowels and rollers
- Waterproofing membranes, repairs and substrate preparation
- Movement-joint materials
- Freight and labour
Where it is used
- Existing tiled walls
- Existing tiled dry interior floors
Read before specifying
Limits and conditions
- Substrate condition, exposure, waterproofing, movement joints and drainage must be assessed for the project. Performance and approvals are not transferable from one build to another.
- Existing tile adhesion, joints, deflection and stability must be assessed. This kit does not replace compliant waterproofing, movement joints, falls, drainage or substrate repairs.
- Mesh is included in this kit. In general, mesh is not automatic just because a surface is tiled: it follows the real substrate and condition.
Shipping notes
- Freight is quoted for your delivery address and confirmed in our response. Material supply is Australia-wide.
- Pack weights make parcel freight a real cost on larger orders, so confirm the quote before you commit.
Delivery and ordering guidance
Questions
How is the complete kit priced?
The TA total of $989.38 includes the base kit at $925.58 and two $31.90 toner bottles. TB uses three bottles ($1,021.28); TC uses four ($1,053.18).
What if grout lines show through?
If grout ghosting or cracks return, stop and correct the substrate. The existing-tile guide lists the checks and stop conditions.
Is the primer different to the wall kit?
Yes. Tiled surfaces in this kit use Primer Beton, while the MicroCem-FB wall kit uses Primer NK.
Can I swap a component?
The kit is a fixed configuration. For a different primer, mesh or protection, use the system builder to price the components individually and confirm the build-up with us.
Related components
Complete kits
Microcement Bathroom Kit – Cemento 3D – 15 m²
15 m2 nominal · Complete TA system $946.48
Complete kits
Microcement Bathroom Kit – MicroCem-FB – 15 m²
15 m2 nominal · Complete TA system $883.78
Complete kits
Microcement Tiled Surface Kit – Cemento 3D – 15 m²
15 m2 nominal · Complete TA system $946.48
Toners
Nikkolor Toner — 250 ml
250 ml · $31.90