Complete kits / Full system
Microcement Bathroom Kit – Cemento 3D – 15 m²
Cemento 3D system for bathroom walls over an assessed substrate, with Decor Finish. Complete TA price $946.48, about $63.10 per m2.
- Pack
- 15 m2 nominal
- Indicative
- Complete TA system $946.48
- Freight
- Confirmed at checkout or by quote
Colour and texture vary with lighting and application. Confirm your finish with a physical sample before specifying.
A Cemento 3D build-up arranged for bathroom surfaces: Primer Beton as the receiving layer, a fibreglass mesh allocation for reinforced areas, two decorative coats and Decor Finish.
Nominal coverage and cost basis
- Nominal coverage
- Up to 15 m2 over two decorative coats
- Base kit price (before toner)
- $882.68
- Complete TA Light price
- $946.48 including 2 toner bottles (about $63.10 per m2)
- Complete TB Medium price
- $978.38 including 3 toner bottles
- Complete TC Dark price
- $1,010.28 including 4 toner bottles
What the kit includes
- 1 x 20 kg Nikkolor Primer Beton
- 1 x fibreglass mesh allocation for up to 15 m2 of applicable reinforced area
- 1 x 20 kg Nikkolor Cemento 3D in your selected colour
- 2, 3 or 4 x 250 ml Nikkolor toner in the selected colour (TA Light = 2, TB Medium = 3, TC Dark = 4 bottles per kit)
- 1 x 2.5 L Nikkolor Decor Finish (Matt or Semi-Gloss)
Not included
- Tools, trowels and rollers
- Waterproofing membranes, repairs and substrate preparation
- Movement-joint materials
- Freight and labour
Where it is used
- Bathroom walls over an assessed substrate
- Reinforced areas where the substrate calls for mesh
Read before specifying
Limits and conditions
- Substrate condition, exposure, waterproofing, movement joints and drainage must be assessed for the project. Performance and approvals are not transferable from one build to another.
- This kit does not replace compliant bathroom waterproofing, falls, drainage, movement joints or substrate repairs. Waterproofing, residual moisture and suitability must be confirmed before application.
- The Decor Finish in this kit, without a slip-resistance additive, is only for walls and dry interior floors. Showers and wet floors are not automatically approved. Additive name, dosage and tested rating are unconfirmed.
Shipping notes
- Freight is quoted for your delivery address and confirmed in our response. Material supply is Australia-wide.
- Pack weights make parcel freight a real cost on larger orders, so confirm the quote before you commit.
Delivery and ordering guidance
Questions
How is the complete kit priced?
The TA total of $946.48 includes the base kit at $882.68 and two $31.90 toner bottles. TB uses three bottles ($978.38); TC uses four ($1,010.28).
Is this kit approved for showers?
No approval is implied. Bathroom use requires compliant waterproofing under the system and a project-specific assessment. Decor Finish without a slip additive is limited to walls and dry interior floors.
Why does the kit say mesh allocation?
The kit carries a mesh allocation for up to 15 m2 of applicable reinforced area. Mesh follows the real substrate and does not replace movement-joint treatment.
Can I swap a component?
The kit is a fixed configuration. For a different primer, mesh or protection, use the system builder to price the components individually and confirm the build-up with us.
Related components
Complete kits
Microcement Bathroom Kit – MicroCem-FB – 15 m²
15 m2 nominal · Complete TA system $883.78
Complete kits
Microcement for Tiled Floors & Walls – MicroCem-FB Kit – 15 m²
15 m2 nominal · Complete TA system $989.38
Complete kits
Microcement Tiled Surface Kit – Cemento 3D – 15 m²
15 m2 nominal · Complete TA system $946.48
Toners
Nikkolor Toner — 250 ml
250 ml · $31.90