Catalogue
Reinforcement / Accessory
Fibreglass Mesh 60 gsm — 1 m × 50 m
Alkali-resistant fibreglass reinforcement mesh, 60 gsm, 1 m wide by 50 m: a nominal 50 m2 roll.
- Pack
- 1 m x 50 m
- Indicative
- $86.90
- Freight
- Confirmed at checkout or by quote
Colour and texture vary with lighting and application. Confirm your finish with a physical sample before specifying.
Reinforcement for compatible microcement systems where the substrate needs it: screeds, repairs, chases, board joints or transitions. It does not replace movement-joint treatment.
01
Nominal coverage and cost basis
- Roll
- 1 m x 50 m, nominal 50 m2
- Cost basis
- About $1.74 per m2 ($86.90 / 50 m2) before overlap and trimming
- Allowance
- Add your own overlap and trimming percentage
02
Not included
- Primer and microcement
03
Where it is used
- Repairs and chases
- Board joints and transitions
- Reinforced build-ups
Read before specifying
Limits and conditions
- Mesh selection, overlap, embedment and joint treatment must suit the substrate and the specified system.
- Mesh is not automatic just because a surface is tiled.
04
Shipping notes
- Freight is quoted for your delivery address and confirmed in our response. Material supply is Australia-wide.
- Pack weights make parcel freight a real cost on larger orders, so confirm the quote before you commit.
Delivery and ordering guidance
05
Questions
60 gsm or 80 gsm?
The 80 gsm is the heavier weight. Choose from the substrate and the specified system, and ask us if unsure.
