Complete kits / Full system
Microcement Bathroom Kit – MicroCem-FB – 15 m²
MicroCem-FB system for bathroom walls over an assessed substrate, with Decor Finish. Complete TA price $883.78, about $58.92 per m2.
- Pack
- 15 m2 nominal
- Indicative
- Complete TA system $883.78
- Freight
- Confirmed at checkout or by quote
Colour and texture vary with lighting and application. Confirm your finish with a physical sample before specifying.
A MicroCem-FB build-up with Primer NK, pre-cut mesh, two decorative coats and Decor Finish, arranged for bathroom and floor use over assessed substrates.
Nominal coverage and cost basis
- Nominal coverage
- Up to 15 m2 over two decorative coats
- Base kit price (before toner)
- $819.98
- Complete TA Light price
- $883.78 including 2 toner bottles (about $58.92 per m2)
- Complete TB Medium price
- $915.68 including 3 toner bottles
- Complete TC Dark price
- $947.58 including 4 toner bottles
What the kit includes
- 1 x 2.5 L Nikkolor Primer NK
- 18 m2 pre-cut fibreglass mesh, including overlap and trimming allowance (covers 15 m2)
- 1 x 20 kg Nikkolor MicroCem-FB in your selected colour
- 2, 3 or 4 x 250 ml Nikkolor toner in the selected colour (TA Light = 2, TB Medium = 3, TC Dark = 4 bottles per kit)
- 1 x 2.5 L Nikkolor Decor Finish (Matt or Semi-Gloss)
Not included
- Tools, trowels and rollers
- Waterproofing membranes, repairs and substrate preparation
- Movement-joint materials
- Freight and labour
Where it is used
- Bathroom walls over an assessed substrate
- Dry interior floors
- Reinforced areas where the substrate calls for mesh
Read before specifying
Limits and conditions
- Substrate condition, exposure, waterproofing, movement joints and drainage must be assessed for the project. Performance and approvals are not transferable from one build to another.
- This kit does not replace compliant bathroom waterproofing, falls, drainage, movement joints or substrate repairs. Do not start the next stage until the substrate and the preceding coat meet the relevant cure and moisture requirements.
- The name says wet-area, but Decor Finish without a slip-resistance additive is only for walls and dry interior floors. Shower floors and other wet floors need a written project-specific specification.
- The 18 m2 of mesh is pre-cut to cover 15 m2 including overlap and trimming.
Shipping notes
- Freight is quoted for your delivery address and confirmed in our response. Material supply is Australia-wide.
- Pack weights make parcel freight a real cost on larger orders, so confirm the quote before you commit.
Delivery and ordering guidance
Questions
How is the complete kit priced?
The TA total of $883.78 includes the base kit at $819.98 and two $31.90 toner bottles. TB uses three bottles ($915.68); TC uses four ($947.58).
Can I use this on a shower floor?
Not on the strength of this kit alone. Wet floors are not automatically approved and need a written project-specific specification, including the waterproofing, falls and drainage.
Does the mesh cover more than 15 m2?
The roll is pre-cut to 18 m2 so that overlap and trimming still leave 15 m2 of coverage.
Can I swap a component?
The kit is a fixed configuration. For a different primer, mesh or protection, use the system builder to price the components individually and confirm the build-up with us.
Related components
Complete kits
Microcement Bathroom Kit – Cemento 3D – 15 m²
15 m2 nominal · Complete TA system $946.48
Complete kits
Microcement for Tiled Floors & Walls – MicroCem-FB Kit – 15 m²
15 m2 nominal · Complete TA system $989.38
Complete kits
Microcement Tiled Surface Kit – Cemento 3D – 15 m²
15 m2 nominal · Complete TA system $946.48
Toners
Nikkolor Toner — 250 ml
250 ml · $31.90