Complete kits / Full system
Microcement Wall & Ceiling Kit – Cemento 3D – 15 m²
Cemento 3D system for interior feature walls, with Decor Finish. Complete TA price $809.60, about $53.97 per m2.
- Pack
- 15 m2 nominal
- Indicative
- Complete TA system $809.60
- Freight
- Confirmed at checkout or by quote
Colour and texture vary with lighting and application. Confirm your finish with a physical sample before specifying.
The most direct Cemento 3D build-up: Primer NK, two decorative coats and Decor Finish for sound interior walls and ceilings.
Nominal coverage and cost basis
- Nominal coverage
- Up to 15 m2 over two decorative coats
- Base kit price (before toner)
- $745.80
- Complete TA Light price
- $809.60 including 2 toner bottles (about $53.97 per m2)
- Complete TB Medium price
- $841.50 including 3 toner bottles
- Complete TC Dark price
- $873.40 including 4 toner bottles
What the kit includes
- 1 x 2.5 L Nikkolor Primer NK
- 1 x 20 kg Nikkolor Cemento 3D in your selected colour
- 2, 3 or 4 x 250 ml Nikkolor toner in the selected colour (TA Light = 2, TB Medium = 3, TC Dark = 4 bottles per kit)
- 1 x 2.5 L Nikkolor Decor Finish (Matt or Semi-Gloss)
Not included
- Tools, trowels and rollers
- Waterproofing membranes, repairs and substrate preparation
- Movement-joint materials
- Freight and labour
- Fibreglass mesh (add it if your substrate requires reinforcement)
Where it is used
- Interior feature walls
- Ceilings
- Stable painted or prepared wall surfaces
Read before specifying
Limits and conditions
- Substrate condition, exposure, waterproofing, movement joints and drainage must be assessed for the project. Performance and approvals are not transferable from one build to another.
- No mesh is included. Joints, repairs and board transitions on your actual substrate may still need reinforcement, which is a separate decision.
- Decor Finish is for walls and dry interior floors. It is not blanket approval for shower walls or exterior walls.
Shipping notes
- Freight is quoted for your delivery address and confirmed in our response. Material supply is Australia-wide.
- Pack weights make parcel freight a real cost on larger orders, so confirm the quote before you commit.
Delivery and ordering guidance
Questions
How is the complete kit priced?
The TA total of $809.60 includes the base kit at $745.80 and two $31.90 toner bottles. TB uses three bottles ($841.50); TC uses four ($873.40).
Do I need to add mesh?
Not automatically. Check board joints, repairs, chases and transitions on your substrate, and add mesh where they require it.
Can it go in a shower?
Shower walls are not automatically approved. Use a project-specific specification and compliant waterproofing.
Can I swap a component?
The kit is a fixed configuration. For a different primer, mesh or protection, use the system builder to price the components individually and confirm the build-up with us.
Related components
Complete kits
Microcement Bathroom Kit – Cemento 3D – 15 m²
15 m2 nominal · Complete TA system $946.48
Complete kits
Microcement for Tiled Floors & Walls – MicroCem-FB Kit – 15 m²
15 m2 nominal · Complete TA system $989.38
Complete kits
Microcement Tiled Surface Kit – Cemento 3D – 15 m²
15 m2 nominal · Complete TA system $946.48
Toners
Nikkolor Toner — 250 ml
250 ml · $31.90