Complete kits / Full system
Pool Microcement System – MicroCem-FB – 15 m²
MicroCem-FB system for swimming pool interiors, after professional assessment, with VetroLiquido PRP. Complete TA price $1,378.30, about $91.89 per m2.
- Pack
- 15 m2 nominal
- Indicative
- Complete TA system $1,378.30
- Freight
- Dangerous goods
Colour and texture vary with lighting and application. Confirm your finish with a physical sample before specifying.
A reinforced MicroCem-FB and PRP build-up for professionally prepared swimming pool interiors: Primer NK, pre-cut mesh, two MicroCem-FB coats and three PRP coats.
Nominal coverage and cost basis
- Nominal coverage
- Up to 15 m2 over two decorative coats
- Base kit price (before toner)
- $1,314.50
- Complete TA Light price
- $1,378.30 including 2 toner bottles (about $91.89 per m2)
- Complete TB Medium price
- $1,410.20 including 3 toner bottles
- Complete TC Dark price
- $1,442.10 including 4 toner bottles
What the kit includes
- 1 x 2.5 L Nikkolor Primer NK
- 18 m2 pre-cut fibreglass mesh, including overlap and trimming allowance (covers 15 m2)
- 1 x 20 kg Nikkolor MicroCem-FB in your selected colour
- 2, 3 or 4 x 250 ml Nikkolor toner in the selected colour (TA Light = 2, TB Medium = 3, TC Dark = 4 bottles per kit)
- 1 x 2.5 L Nikkolor VetroLiquido PRP (Matt or Satin)
Not included
- Tools, trowels and rollers
- Waterproofing membranes, repairs and substrate preparation
- Movement-joint materials
- Freight and labour
Where it is used
- Swimming pool interiors, after professional assessment
Read before specifying
Limits and conditions
- Substrate condition, exposure, waterproofing, movement joints and drainage must be assessed for the project. Performance and approvals are not transferable from one build to another.
- Professional application and project-specific feasibility assessment are required. This decorative system does not replace structural design, compliant waterproofing, crack treatment, movement joints, penetrations, filtration design or pool-shell repairs.
- Tools, waterproofing, repairs, freight and labour are not included.
- Allow the final protection to harden at least 15 days at 20 C and 65% RH before filling, and longer in cooler conditions.
- Pool water: pH 6.5 to 7.5, free active chlorine 0.7 to 1.5 ppm, water 18 to 30 C. Avoid concentrated treatment chemicals touching the coating. Chlorine shock treatments may shorten coating life and change appearance.
Shipping notes
- This product contains VetroLiquido PRP, which is treated as dangerous goods. It cannot go as standard parcel freight.
- We confirm a dangerous-goods freight quote, or pickup availability, before anything is arranged.
Delivery and ordering guidance
Questions
How is the complete kit priced?
The TA total of $1,378.30 includes the base kit at $1,314.50 and two $31.90 toner bottles. TB uses three bottles ($1,410.20); TC uses four ($1,442.10).
How long before I can fill the pool?
At least 15 days at 20 C and 65% RH after the final protection, and longer when cooler. Follow the project specification.
Can I shock-dose the pool?
Chlorine shock treatments may reduce coating life and affect appearance. Keep within the stated water parameters and see the care guide.
Does the kit waterproof the pool?
No. The pool shell must be professionally assessed and watertight before this system goes over it.
Can I swap a component?
The kit is a fixed configuration. For a different primer, mesh or protection, use the system builder to price the components individually and confirm the build-up with us.
