Limewash

Lime finish guide

What is limewash paint, and where can you use it?

Explore Nikkolor LimeWash Paint for softly clouded walls and ceilings. Learn about substrates, brushwork, colour samples and the guidance to check before use.

Lime compared

Nikkolor LimeWash Paint is a natural hydrated-lime mineral paint for matte, softly clouded walls and ceilings. Its brushwork produces gentle tonal variation rather than the uniform appearance of conventional paint. It is a different product from a trowelled microcement kit. This guide explains the published product information and the questions to settle before specifying or ordering it.

What gives LimeWash its appearance?

The product page describes long-aged hydrated lime, calcium carbonates and selected marble powders forming a breathable mineral paint. The result has the depth and irregularity of hand-brushed lime. Brushwork, absorbency, light and colour influence the mottling, so two walls are not promised to look identical.

Use the product’s finished-room inspiration to understand the intended character, then approve a physical sample. Keep the batch and application technique consistent for the work. A softly clouded wall is not the same visual effect as a smooth Cemento 3D surface, a Marmorino plaster or a mirror-polished Marblex finish.

Where does the catalogue say it can be used?

Published applications include interior walls and ceilings and compatible lime or lime-cement plasters. Protected exterior wall surfaces are listed only after project assessment. The product’s constraints also say exterior exposure and any wet-area use need project-specific approval. A general wall description is not blanket approval for every substrate or exposure.

LimeWash is not a floor coating, microcement or a waterproofing membrane. Do not select it as a substitute for a microcement floor system simply because the colour family is available in both ranges. If the planned substrate or service condition is not covered clearly by the current technical data, contact Nikkolor before buying or applying it.

How is it applied, and what should I confirm first?

The published method is brush application in irregular, uniform strokes, following the current dilution and drying instructions. Confirm substrate suitability, preparation, toner dosage and any protection before application. This article does not supply a new dilution ratio or a generic drying schedule where the current technical data should govern.

Do not substitute the microcement mixing and coat instructions. They describe a different material and system. Ask for the instructions for the selected LimeWash pack and the actual receiving surface. Where the work includes a condition not resolved on the product page, obtain project guidance rather than transferring an application method from a different lime finish.

How does it differ from Marmorino or microcement?

The existing comparison guide describes LimeWash as brushed mineral paint and Marmorino + Lime as a trowelled decorative plaster. Marmorino has its own application and finishing cycle. Neither should inherit microcement instructions simply because these products appear together in the Nikkolor catalogue.

Cemento 3D and MicroCem-FB are the microcement materials used in the site’s kit systems. Their preparation, decorative coats and protection are planned together for the assessed substrate. If you are choosing between a softly clouded painted wall and a trowelled finish, compare physical examples of each complete finish rather than choosing on a shared colour name alone.

Can I choose from the Nikkolor colours?

The product page lists Nikkolor toner shades, with the colour formula and dose confirmed for the selected pack. Do not automatically use a microcement TA, TB or TC bottle quantity in LimeWash. The product page explicitly says that its formula and dosage must be confirmed for LimeWash and the chosen pack size.

The Colour Room is useful for narrowing colour families and comparing neighbouring paint, timber and other finishes. Its room illustrations and screen colours remain guides. The AI Visualiser shows colour in a smooth Cemento 3D finish, not a faithful LimeWash texture simulation. Use a physical LimeWash sample to approve the actual brushwork, colour and appearance.

How do I plan quantity, supply and installation?

The manufacturer pack range shown on the site is 2.5 L, 5 L and 14 L, with Australian availability quoted. The product page supplies manufacturer yield information and says to allow for the complete cycle and substrate absorption. Check those current figures for the project; do not copy a microcement kit’s nominal area into a LimeWash order.

Australian pack availability and supply are confirmed by quotation for this range. Toner, substrate preparation, tools and any additional protection are excluded unless the quote lists them. Keep the written scope with the approved sample, and ask for clarification if the quantity or protection is not specified.

For an installed project rather than material supply, contact Lux Cement to discuss the finish. Genuine Nikkolor products bought from Nikkolor Australia carry the five-year product warranty under its terms, but application workmanship is a separate matter. Obtain the relevant care and handover guidance for this product instead of assuming a microcement floor routine applies to a lime-painted wall.

Common questions

Is LimeWash Paint suitable for floors?

No. The catalogue describes it as wall paint, not a floor coating or microcement system.

Will every wall have identical mottling?

No. Brushwork, absorbency, light and colour influence the appearance. Approve a physical sample and keep technique and batches consistent.

Can I use a microcement toner formula?

Not automatically. Confirm the LimeWash formula and dose for the selected pack before application.

Before you buy

  • Prices are AUD catalogue estimates, not quotations. Freight, tools, labour and substrate work are extra.
  • Confirm the current technical data sheets and a physical sample before specifying.